Přeskočit na hlavní obsah

U8g2

Internal Azure DevOps mirror of U8g2 (upstream: olikraus/u8g2), the monochrome graphics library for embedded displays, imported here for testing before being exported as a public middleware module to GitHub.

This is the import side only — see U8g2_AzureImport.sh in Middlewares_Importer. The export step (Azure DevOps → GitHub, with its own testing/approval logic) is separate and not yet built.

This file itself is regenerated (copied verbatim) by every import run — don't hand-edit it here, edit README_U8g2Default.md next to U8g2_AzureImport.sh instead.

Branch & repository layout​

Everything lives on a single anchor branch (master). One real commit per U8g2 version, tree replaced wholesale each time, commit message naming its version (e.g. U8g2 2.36.5). No git tags are created here — this is the Azure DevOps staging side only; tagging happens later, during the separate export step that promotes a tested/approved version to the public GitHub middleware repo.

<repo root>
├── CMakeLists.txt   auto-generated every version (see below) — do not hand-edit
├── README.md        this file
└── U8g2/            the release as upstream tags it, submodules vendored in place,
                     no .git / .gitmodules / .gitignore anywhere
    ├── CMakeLists.txt     upstream's own — defines the `u8g2` library target
    ├── csrc/              the C library: u8g2, u8x8, u8log, MUI — this is what gets built
    ├── cppsrc/            Arduino C++ wrapper (U8g2lib / U8x8lib) — headers only are exposed
    ├── sys/               upstream's per-platform examples and HAL samples
    ├── tools/             upstream's font/code generators
    └── ...

Source​

U8g2_AzureImport.sh discovers versions via the GitHub Tags API (u8g2 publishes no GitHub Releases) and only takes plain x.y.z tags. Each version is fetched with a shallow git clone --branch <tag>, the checked-out tag is verified to be exactly that version, and the resulting tree is copied into U8g2/ as-is.

Submodules​

Upstream references a submodule — sys/arm-linux/c-periphery (from vsergeev/c-periphery, used by the Linux example ports). U8g2_AzureImport.sh resolves every submodule recursively at the exact commit the tag pins (git submodule update --init --recursive), then strips every .git entry, .gitmodules and .gitignore file before committing. What lands in U8g2/ is fully flattened, ordinary source — no submodules, no gitlinks, no dependency on any other repository. A version whose submodules can't be fetched is skipped with a warning rather than imported incomplete.

CMake support requirement — versions without a usable target are not imported at all​

The generated root CMakeLists.txt only wraps upstream's own U8g2/CMakeLists.txt, so a version is imported only if that file exists and defines the plain add_library(u8g2 ...) target. Anything else is skipped entirely — no commit, nothing published for it in this repo. In practice (checked against every upstream x.y.z tag) this excludes only 2.29.11, whose CMakeLists.txt is an ESP-IDF-only register_component() file with no regular CMake target.

Building against it — the generated CMakeLists.txt​

The root CMakeLists.txt in this repo does not invent any library — it just add_subdirectory()s U8g2/, whose upstream CMakeLists.txt defines the u8g2 target:

  • sources: every csrc/*.c (u8g2, u8x8, u8log and MUI — including all display drivers and fonts; unused ones are dropped by the linker with -ffunction-sections -fdata-sections + --gc-sections),
  • PUBLIC include directories: csrc/ and (in newer releases) cppsrc/.

Vendor this repo (e.g. as a submodule at Middlewares/U8g2), then from your own top-level CMakeLists.txt:

add_subdirectory(Middlewares/U8g2)
target_link_libraries(${PROJECT_NAME}
    PRIVATE
        u8g2
)
#include "u8g2.h"

U8g2 itself has no hardware access — you provide the two u8x8 callbacks for your MCU (u8x8_msg_cb for the byte transport — SPI / I²C / parallel — and for GPIO & delay) and pass them to the matching u8g2_Setup_<display>() call. See upstream's porting guide.

Notes on the upstream target​

  • C++ wrapper is not compiled. cppsrc/U8g2lib.cpp / U8x8lib.cpp depend on the Arduino framework and are not part of upstream's u8g2 target — only the csrc/ C API is built.
  • ESP-IDF is handled by upstream's file itself: under ESP-IDF it calls idf_component_register() and returns before add_library(); use U8g2/ as an IDF component there instead of going through the root wrapper.
  • Upstream's file also declares install() rules (library, headers, u8g2-config.cmake) — harmless unless you run cmake --install on your own project.

Notes​

  • A brand-new repo (or an existing repo that's just missing the master branch) gets a real Initial commit containing just this README.md, pushed immediately when the branch is created — so it's never left with zero commits even if the first version afterwards fails or every available version is skipped. The first version actually imported then wholesale-replaces that with the full tree, same as every later version.
  • No git tags are created by this importer — tagging happens later, during the separate export step.
  • Re-running the import is idempotent — a version already present as a commit on master (matched by its commit message, U8g2 <version>) is skipped.
  • Versions come straight from upstream git tags (x.y.z, no v prefix) — no normalization needed, unlike FreeRTOS.

Authors​